Guide · reviewed November 14, 2026
Join wallpaper sheets around a miniature room
Plan repeats, sheet overlaps and corners before committing to the final paper.
Open Miniature Print Workshop →Choose a reference edge
Decide which vertical edge of the first wall will establish the pattern. Keep the same scale, colors and repeat for every surface that should match. The export starts the design at the top-left of each surface. For a continuous run of several walls, enter their combined width and cut the finished run at the measured corners. This maintains one pattern origin across the whole run.
Use the shared 10 mm area
On multi-sheet exports, the next page begins 10 mm before the previous page ends. The repeated strip gives you visible content to align. Trim a single edge and lay it over the matching strip. Do not remove 10 mm from both pages and expect the pattern to remain continuous. Keep the ruler and page labels until the joined area has been checked.
Dry-fit first
Cut an oversized paper mock-up if the room has uneven walls, projecting trim or a roof slope. The tool models rectangular surfaces; it does not automatically subtract doors or windows. Mark openings on the fitted paper and follow your chosen installation method. Save the settings file if you may need a matching repair sheet later. Original generated surface designs may be printed for personal craft projects and physical items you make.